Construction

The stocks are made using a two part mold technique. The cloth is hand laid in the mold with epoxy resin. Extra carbon fibre is placed in the action-pistol grip area to improve the strength. The mold is then vacuum bagged to ensure the proper cloth to resin ratio.

After the two halves of the stock are joined the action area is molded out of epoxy resin. The barrel channel is lined with carbon fibre cloth and resin. The hollow areas of the stock are filled with expanding polyurethane foam. The recoil pad is glued to the stock, to the customer’s specified length of pull, and sling swivel studs are glued in place.

Models on offer:

 

   

Remington 700

Long action Right hand

 

 

 

 Remington 700 Long Action Right Hand Carbon fibre

Long action Left hand

 rem700 lh la

Short action Right hand

rem700 rh sa

Short action Left hand

rem700 lh sa

   
 

 Remington Model 7

 Right hand only

Model 7 stock
   

 

 

Remington 788

Short action Right hand

rem788 sa rh

   

A tactical style stock that can be inletted for most actions.

Comes with saddle style cheekpiece and limbsaver recoil pad.

$800

Tactical

Tactical stock

   
   

 With a Limbsaver recoil pad approx. 587g/20.7oz

Or with a Pachmayr RP250B recoil pad approx. 517g/18.2oz

Stainless steel recoil lugs available for $20

Tikka T3 

Tikka T3

   
 This stock can be inletted for a number of actions, including most Sako's, older model Tikka's and Sako type actions, eg Howa 1500

Sako 75

Sako 75
   
 

Blaser R93 and Blaser R8

R93   ***stock only, chassis/action not included***

This is the Offroad stock, but the Professional model will also fit

Saves approx 400g over the factory stock

$700

Blaser R93

 

 

R8   ***stock only, chassis/action not included***

Saves approx 400g over the factory stock

 

$800

Blaser R8 

 

Standard length of pull is 13.5”. Up to 14” LOP is available, however a 1” recoil pad will be needed.

The action area and bottom metal is not a drop in fit, some filing/sanding will be needed to fit the stock to your rifle. The action screw holes will also need drilling. If you send us your barreled action we will do this for free.

Recoil pads: 

Pachmayr RP250B recoil pads can be used to keep the overall weight of the stock down. These pads are 0.5" thick.

Limbsaver recoil pads can be fitted instead, although there is an extra $40 charge for these recoil pads.

Weight:

As these are handmade the weight does vary from stock to stock. Typical weight with a 13.5”LOP  and Limbsaver 1.0” recoil pad is approx 600g / 21 oz

Cost:

 

With a Pachmayr RP250B recoil pad  

           

 

With a Limbsaver 1.0" recoil pad

 

 $635

 

 

 

 

 

 

 

 $675

 

 

 

Models on offer:

Remington 700

  • Long action Right hand

  • Long action Left hand

  • Short action Right hand

  • Short action Left hand

 

Remington 788

  • Short action right hand.

 

(Other makes and models available on request)

 

Standard length of pull is 13.5”. Up to 14” LOP is available, however a 1” recoil pad will be needed.

 

The action area and bottom metal is not a drop in fit, some filing/sanding will be needed to fit the stock to your rifle. The action screw holes will also need drilling. If you send us your barreled action we will do this for free.

 

 

 

Recoil pads:

Pachmayr RP250B recoil pads are used to keep the overall weight of the stock down. Pachmayr decelerator or Limbsaver recoil pads can be fitted instead, although there is an extra $40 charge for these recoil pads.

 

Weight:

As these are handmade the weight does vary from stock to stock. Typical weight with a 13.5”LOP and Pachmayr RP250B 0.5” recoil pad is approx 600g / 21 oz